How to Select ?

1.    Y-inlet 2.    Square to round inlet 3.    T connection 4.    Elbow 5.    Transition 6.    Bevel end 7.    Expansion segment 8.    Tension ring 9.    Wall pass through 10.  Galvanized cable 11.   H-track 12.   Flash mount track

 

General Fittings 

Usually single-layer or double-layer inlet fittings close the outer surface of the metal channel by means of belts and rivets. DurkeeSox®, on the other hand, with its double layer inlet fitting, only the first layer is installed in the metal duct, secured to the duct by means of a belt and concealed by the second layer, and is very easy to remove and wash.
 

End Cap

Durkeesox uses an end cap, joins with duct by zipper, easier to change for washing or extend in the length direction.

 

 

 

 

 

Zipper Connection

Join among straight duct, fittings and components, like conventional used flange.

 

 

 

 

Elbow

Standard centerline radius is 1,5 x Dia. The elbow consists of multiple gores, different curve angles per application requirement.