Humidifiers

Evaporative humidifiers are aqueous humidifiers with both cooling and humidification properties. It consists of a water tank and pump sprinkler system, The water in the tank is pumped onto pads by the pump, the passing air over the wetted pads takes the water by evaporating it with the hidden heat. So, the temperature of the air is reduced  lightly.

Operation Principle
Adiabatic humidifiers / coolers operate based on water evaporation by air flow passing through the wet surface by natural conditions. The air carries the water vapor and reduces the heat of evaporation in the air. This principle guarantees the oscillation of water in the liquid state during the formation of the gas-air mixture. Microorganisms, minerals and similar parts do not get in to air during the evaporation phase that makes the principle healthy. If only the high air flowed, water droplets could get into the air. This is the biggest difference between Media pad and atomizer humidifier By. adjusting the air flow velocity or using droplet separator eliminates this disadvantage.

Evaporative Panel Rigid Construction
The evaporative panel consists of cellulosic or glass fiber pads which are supported by structural additives that absorb water without destroying the rigidity of the device

Hygienic Panel
When the panel is inorganic, it is not a source for bacteria and mould. The panel contains silver ions, and these ions act as a biocide to prevent water particles from escaping without evaporation

High Efficiency
The mounting of the panel boards was done by pressure on the metal frames without use of glue. The number of boards per clear front surface area is greater than without bonding. In addition, great design of the angles, the saturation efficiency of the panels is highest, and the loss of load is minimal.

 

Low Maintenance Cost
As the universal solvent is water, it can dissolve any adhesive as time passes. This is the reason why bonded panels lifespan is shorter than heat assembled panels. The lifespan of panels without adhesives is significantly longer than the bonded panels. The most important thing is they can operate with any kind of water because there is not an adhesive
 

Features

Easy Maintenance
Panel plates are mounted on stainless steel frames with an integrated sprinkler system. Maintenance and replacement can be done easily by hand. The cassettes can be easily removed from the air handling unit by pulling forward and the space required for inter-service is reduced. It is easy to reach the device for cleaning and maintenance.